Quick Winterizing Question

[JGKoenig]

I have an Alpha 1 V6 and am trying to winterize it. Seems easy enough. Only problem is getting the drains out of the manifolds. I have 2 brass plugs in there (9/16") that although they are not corroded, do not want to budge. Obviously I don't want to strip them.

I have not yet warmed up the engine. Will this assist in getting them out. Any other ideas?

Thanks

 

[Haut Medoc]

Re: Quick Winterizing Question

Try harder & make sure you are going the right way.....
They are two dissimilar metals, it will come loose....
I would put anti sieze on them this time......​