Question for KaGee

[Boomyal]

Getting ready to hang on the outdrive. May have mixed up the trunion caps and that is a no no. Those caps are installed then line bored to make them square and round.<br /><br />I did mark them but don't know whether I referenced from inside the boat or out. Yeah, I know, port is always port no matter your position to the boat. But Hey! As you know, lots of details to keep track of.<br /><br />Can you tell me whether the zerk fittings, on your caps, face upward at 45 deg or downward at 45 deg. That will tell me which is which for sure.

 

[KaGee]

Re: Question for KaGee

Hmmmmmm.... mine are ,straight!<br /><br />Oh Boy 50-50 guess. That's I put mine in baggies.

 

[Boomyal]

Re: Question for KaGee

Originally posted by KaGee:<br /> Hmmmmmm.... mine are ,straight!<br /><br />Oh Boy 50-50 guess. That's I put mine in baggies.

Ah heck, both of mine are at an angle. Figured that woulda been universal. Guess not. I used the baggie trick too, 'cept when I took the end covers and trunion caps out to paint them I didn't pay attention to how I had the bags marked. It woulda been a no brainer from the outset because of the flush fitting end cap.<br /><br />Oh well, I guesss we'll see how uniform OMC's casting and machining was.

 

[KaGee]

Re: Question for KaGee

Sorry bro!

 

[whywhyzed]

Re: Question for KaGee

my caps are punched "L" and "R"... look close maybe there's some indication on there...

 

[Boomyal]

Re: Question for KaGee

Originally posted by hystat:<br /> my caps are punched "L" and "R"... look close maybe there's some indication on there...

Where are they punched hystat?