prop

[laker_jim]

I just got a 1988 bayliner capri 20 footer it has a OMC Cobra motor and stern drive.what i like to no is the HP and what size the prop has to be = the prop i took off ( it busted ) is stamp on it is ( 13 3/4 x 15 ) the number is 391198 and it has 13 spline is this the right prop for this unit <br /><br />thanks jim

 

[Dunaruna]

Re: prop

If its the 3.0L it about 120hp at the prop.<br /><br />Check the prop FAQ section, your WOT is the key to determine correct prop but other factors need to be concidered.<br /><br /> http://www.iboats.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=36;t=000030;p=1#000000 <br /><br />Aldo

 

[RatFish]

Re: prop

After you read Dunaruna's link and figure out what prop you need, go to iboats prop finder. They are running a good sale on props now. IMHO, The Hustler Aluminum would be good for your application.

 

[summit1]

Re: prop

Will a prop from an OMC outdrive fit on an Alpha 1?

 

[RatFish]

Re: prop

summit1,<br /><br />I doubt it. Post your question as a new topic. You will get a better response.

 

[Bondo]

Re: prop

Will a prop from an OMC outdrive fit on an Alpha 1?

Depending on the Year of the OMC,<br />Yes............<br />But,<br />A Merc. Prop, will Not fit on the same OMCs.......<br />Spline Depth is Different..........