Prop siezed on 1973 OMC Sterndrive

LTill

Recruit
Joined
Jul 23, 2002
Messages
4
Hi everyone,<br /><br />My name is Larry and this is my first post to the group. I have a 1973 Seaswirl with a 165hp OMC Sterndrive, Model # 98030 9, Serial # W 2793. It’s been sitting in my driveway for 2 years. I took it out last week to check it out before selling it - the boat ran like a champ last time it was out. The engine was fogged before it was stored. When I got the boat on the water and engaged the prop, the steering wheel jerked to the left and killed the engine. At idle the engine still runs great, but each time I tried engaging the prop the same effect – steering wheel jerks to the left and the engine dies. <br /><br />My question is this: Does this sound like something has seized in the lower unit? The prop spins freely when the drive is lifted. I don’t know all that much about these motors – I can fix the electronics but I’m all thumbs with engines. <br /><br />Any advice or ideas you may have would be greatly appreciated. <br /><br />Thanks everyone,<br />Larry
 

JB

Honorary Moderator Emeritus
Joined
Mar 25, 2001
Messages
45,907
Re: Prop siezed on 1973 OMC Sterndrive

Howdy, L Till.<br /><br />Welcome to the Board, but the wrong forum. :( <br /><br />Try the I/O and Inboard Engines Forum.<br /><br />Good luck. :)
 

LTill

Recruit
Joined
Jul 23, 2002
Messages
4
Re: Prop siezed on 1973 OMC Sterndrive

Whoops, sorry JB, thanks for the clue :)
 
Top