GOOD NEWS. . . . The PICTURE UPLOAD FUNCTION IS WORKING !!! The tech folks at the parent company have been able to remedy the issue. You can upload pictures once again. Thank you for your patience.
I'm replacing the prop seals on my Johnson 35. The Seloc manual suggests coating the seals with gasket sealer on the outside faces, then grease in between the two seals. Sound right? Thanks-Jeff.
I'm replacing the prop seals on my Johnson 35. The Seloc manual suggests coating the seals with gasket sealer on the outside faces, then grease in between the two seals. Sound right? Thanks-Jeff.
I got 'em out of my '75 15hp with an old-school slide hammer with a screw on the end.. yanked 'em out easily, and apparently didn't nick the propshaft, as it seals awesomely now.