Prop removal

[fishknocker]

Okay, my Mercruiser was easy. This Volvo-Penta has me stumped. How do I remove the prop? I think I just need to remove the protective cone from the rear of the prop. My guess is left-hand threads too. Am I doing the right thing ?

 

[Maclin]

Re: Prop removal

What VolvoPenta drive do you have?

 

[fishknocker]

Re: Prop removal

I'm pretty sure it's the AQ260.

 

[Maclin]

Re: Prop removal

All the threads you encounter will be right handed. The cone is threaded on then held in place by one bolt that threads into the end of the prop shaft. Remove that bolt then unscrew the cone, there s probably a hole thru the cone that a rod or screwdrive can be inserted thru to both sides and used for leverage. After that just watch all the nuts and keepers and washers that are in front of and behind the prop and in what order.

I believe there are pics of this available by following the stickies at the top of the main VolvoPenta forum.

 

[Maclin]

Re: Prop removal

You can search for then download an owner's manual for your Aq260 using the link below, type in AQ260 in "Engine type" then click "Search >"

http://www.volvopenta.com/VOLVOPENT...LICATION_SEARCH/Pages/publication_search.aspx


There are sections on prop removal and installation in the manual for the AQ260.