Powerhead Swap GT150 - GT200

[Skeet200ZX]

I hope I can explain this and still make sense. I have a 1989 GT150 on a 20' Skeeter Bass Boat. I have the opportunity to buy a 1992 GT200 that has no lower unit (hit a log in the river) for $500. I'm pretty sure it won't bolt right up because the 150 is a crossflow and the 200 is a looper. However, the same guy has the midsection, complete, from a 200 Venom that he will throw in with the powerhead. I know my lower unit should fit either of these, my question is will the Venom midsection bolt to the GT200 Powerhead? Unfortunately I don't have model numbers for any of them except for mine and its J150STLECM. Also, should I be concerned of damage to the powerhead on the GT200 since the lower unit was removed in a pretty violent fashion?? It would be great to put all of these together and have a 200 for $500! Thanks in advance.

 

[Skeet200ZX]

Re: Powerhead Swap GT150 - GT200

Does anyone know if this swap will work? I'm about 90% sure that it will all fit together, the upper exhaust housing gaskets on the Venom and GT200 are the same. I already know that the lower unit I have will fit the Venom exhaust stack, I'm just hoping to hear from some experts on their thoughts on this. Thanks!

 

[Dhadley]

Re: Powerhead Swap GT150 - GT200

Your lower unit will bolt up to either looper midsection. You'll need a looper shift rod.

 

[Skeet200ZX]

Re: Powerhead Swap GT150 - GT200

Thanks, that is correct . . what I need to know for sure is if the GT200 powerhead will bolt directly to the Venom midsection. Anyone? thanks in advance!