Power Steering Issue

[kaw]

I'm new to the forum, I bought a 1990 Sea Ray 160 BR with a 3.0 with a cracked head, I need to replace, I thought I got a deal, but maybe not. My question is about the steering. The wheel will not turn left or right. Is it because the power steering pump is not turning. I think it should still turn even though the engine isn't running, maybe just a little harder. Any ideas would be helpful.

 

[Searayb]

Re: Power Steering Issue

You are correct, it should still turn with the engine off.

 

[trkr75]

Re: Power Steering Issue

Sounds like you steering cable is froze up. Try pumping some grease into it (should be a zert in the engine compartment towards toe end of the cable) Then on the out drives push and shove till it breaks free. Then think about getting a new steering cable.

 

[kaw]

Re: Power Steering Issue

It was stuck and we did get it freed up. The boat had sat for awhile before I bought it, it's defineitely a project. I am replacing the motor as well because it has a cracked block. Another question I have. We removed the outdrive and have found a crack in the gimbal housing. Does anyone know if you can purchase a new gimbal housing plate without having to by the bellhousing as well. Is it possible to weld these pieces?