Popping noise when lowering outdrive

ratdude747

Chief Petty Officer
Joined
Sep 30, 2023
Messages
474
Noticed a weird popping noise when lowering my outdrive (MC-1 888) after I got home from an outing today. See video.

Is this normal? If not, what would cause it? I did hit a bit of wood today, once hard enough I thought I nailed the prop (but the prop, despite being plastic, only had blunted/scraped leading edges). I was trimmed slightly up when that happened. I hit some more wood lighter at idle speed with the drive at trim cutoff (shallow creek leading to boat ramp).
 

Attachments

  • VID_20260703_211914.mp4~2.mp4
    11.5 MB · Views: 0

Bt Doctur

Supreme Mariner
Joined
Aug 29, 2004
Messages
19,505
sounds like the rubber bushings are too tight or dry.other cause is tight seals on the ram ends. More common with those rams vs the newer type
 
Top