Pointers on replacing Flywheel

[BTate]

2000 model 5.7 volvo
I have a section of bad teeth on my flywheel. Need to replace it. I need a few pointers on things I need to look out for when im pulling my engine. I have done plenty on mechanic work but never had a reason to pull a marine engine.
Thanks in advance

 

[Scott Danforth]

No need to replace the flywheel. just spend the $15 on a ring gear

 

[Scott Danforth]

light reading on how to replace the ring gear

Ring Gear 1995 Mercruiser 5.0 LX

I am looking at replacing the ring gear on the 5.0 LX. I checked the parts catalogue online, but the only listing is for the whole flywheel with the ring gear already installed. When I do an onlibe search, Sierra has a ring gear listed for a 14-1/8 flywheel, PN: 18-4516. Would anyone know if...

forums.iboats.com

4.3lx flywheel replacement

Good morning, As I am summerizing my boat for this season the shop tells me my starter is going but that it is more than likely a flywheel issue. I decided to replace the starter myself in hopes they were mistaken. They were not, my flywheel has worn down and missing teeth. I have a 95 19'...

forums.iboats.com

pulling your flywheel is easy.

pull drive (like you do every fall for maintenance)
disconnect exhaust hoses and water supply hose
disconnect electrical cables and the big plug
disconnect control cables
disconnect fuel lines and plug
unbolt motor mounts
lift motor out of boat
remove flywheel (can be done on the hook)