Paint on unit

[cbass74429]

I have a 200 Johnson, Model# J200PLSSC. I have had paint peel off the lower unit ever since I've owned it! How to fix ? Johnson said they wouldn't do it! Out of warranty. That was 7 to 8 yrs ago. It is just getting worse !!!!
I Appreciate any Help or Response...
Thank You Davey C Sr

 

[ezeke]

Re: Paint on unit

I've had good luck on more than a few occasions following a few tips from this site: http://www.nymarine.ca/Tips.html

I like to take the gearcases down to bare metal and then use Mar-Hyde's Single Stage Self Etching Primer. You can just brush it on.

 

[cbass74429]

Re: Paint on unit

Sounds Good ! I know I don't have spider cracks! Just peeling off! It looked like it wasn't polished the day I got it. Just faded and gets worse. So what color do I need? Or color code?
Thank You Very Much For Your Time and Response..........

Davey C Sr

 

[tashasdaddy]

Re: Paint on unit

contact Ny, they will tell you .

 

[ezeke]

Re: Paint on unit

BRP/Evinrude dealers have the aerosol paint. You need a clearcoat on top of that.

Go to the parts website and navigate to you motor. Paint is one of the selections in the parts catalog.
http://shop.evinrude.com/

Due to the shipping hazard, you may find it better to deal with a local BRP dealer. Choose "looking to have my motor serviced" and then "area code" for a broader selection: http://www.evinrude.com/en-US/Find-a-Dealer

 

[cougar1985]

Re: Paint on unit

make sure you use a proper primer such as zinc cromate or it (paint) will just come off about the first use,found out the hard way.