OMC PART ?

[Bajass235]

Hey Guys <br />I'm looking for OMC #388324 This is a light<br />weight flex flywheel to fit a crossflow 235<br />anyone have one for sale or know where i can find one ?<br /><br /> Thanks Dwayne

 

[Dhadley]

Re: OMC PART ?

I've got 2 but they are for loopers. You might contact Baker Marine Support at 847-838-0066 (www.scaryfast.com) or Gordon at Monty racing at 561-219-4772 (www.montyracing.com) or Marvin at Evolution Marine at 504-385-0247. I don't think Dean at Wizard Performance has one but you may want to try him to see if he knows where one is (863-666-8888).<br /><br /> I don't think it makes any difference but be sure and tell them if you are using an even fire crank or the standard type.What kind of a rig are you putting together?<br /><br />Good luck!

 

[Bajass235]

Re: OMC PART ?

Working on 2 at the time ,<br />1 is an old shallow vee Baja that has been lightened to about 800 lbs. building a low rev high torque 235 for that one <br />second is a Hydrostream Vector <br />Building the second 235 for MAX rpm

 

[Dhadley]

Re: OMC PART ?

Neat projects. We did a Vector years ago with a 150 then a 200 (crossflows)-- all stock except for Boyesen reeds and low water pick ups. We also did a V-King (or Viking which ever is older -- can't remember) with a small bore 235. I have a Vegas YT with a 200 looper right now. Fun ride!<br /><br />If you need suggestions on the Vector, call Baker Marine. Ron Sr used to work at 'Stream and did a lot (or all) of the design work on the concave pad. <br /><br />Good luck with your projects and let us know how you make out.