Older Honda BF100 fuel hose connector interchangeable with OMC?

[infoanalysis]

I just bought a honda BF100 circa 1980s with no fuel tank or hoses.( started up when I sprayed fuel into carb) I see that the female fitting for the engine side 17650 921 003ZB looks very very similar to the Johnson Evinrude old barb style, however the price differential is 5 xs more for the Honda. Are they interchangeable? I know the modern square pin is different then the round dual pin which do look similar to each other.

 

[GA_Boater]

Welcome aboard.

You need a tank and hose. Tanks are pretty much universal and complete hose kits for Hondas come with all the needed bits and pieces.

 

[infoanalysis]

why even bother answering that was useless information

 

[GA_Boater]

why even bother answering that was useless information

I'm sorry I tried to save you some money. Good luck.

 

[ahicks]

The OMC won't work, but a Yamaha will.

 

[racerone]

Find a $1.00 used OMC fitting.----Put it on the Honda.-----Put the $10 OMC fitting on the hose .----Done.

 

[ahicks]

Find a $1.00 used OMC fitting.----Put it on the Honda.-----Put the $10 OMC fitting on the hose .----Done.

Easier to just use a Yamaha fitting on the hose, no?

 

[GA_Boater]

My useless message was related to the OP not having a tank or hose. That's what he said - No tank or hose.

So why mess with changing hose ends or motor connections. Buy a tank and a hose kit with the Honda end pre-installed.

 

[Scott Danforth]

Are they interchangeable?

NO