dolemite_1
Seaman
- Joined
- May 7, 2008
- Messages
- 71
Hi Guys,
So one week ago; I had a mechanic service both of my Bravo 3 outdrives. He split the drives to clean everything out and even popped the top off to check on the gears and a shifting issue. I wasn't able to put the boat in the water because I discovered a torn shift cable boot after the fact that needed to be replaced. Fast forward to today and I noticed gear oil seeping out from where the prop connects to the lower unit. Could this be related to a misplaced or missing seal when the drive was apart? I have included a pic below.
Thx
Brian
So one week ago; I had a mechanic service both of my Bravo 3 outdrives. He split the drives to clean everything out and even popped the top off to check on the gears and a shifting issue. I wasn't able to put the boat in the water because I discovered a torn shift cable boot after the fact that needed to be replaced. Fast forward to today and I noticed gear oil seeping out from where the prop connects to the lower unit. Could this be related to a misplaced or missing seal when the drive was apart? I have included a pic below.
Thx
Brian