bigwheeler
Cadet
- Joined
- Apr 2, 2008
- Messages
- 10
I just bought a 1996 115 mercury offshore eddition motor. When i got it home i hooked up the water to it to check it out and it started and ran great exept there was very little water coming out of the peep hole. I decided to replace the water pump and after i did there is still very little to no water coming out. I put my finger up to the hole and there is air pressure coming out but very little water (at least not as much as there should be). The only thing i can think of is that mabye i but the impeller in backwards but if i did i wouldnt think that i would get air pressure out.