Knottymate
Seaman
- Joined
- Jan 25, 2011
- Messages
- 50
Yamaha 703 Controls Manual Choke. Throttle Switch, Lanyard, Starter,Fuse Good.
Ignition Switch On gauges on Trim works. Move to Start Zero. Thinking Relay at engine
or Ignition Switch. Most likely what part and if possible part number. Any quick check with volt
meter to confirm. Regards Motor ran fine an hour later No Start.
Ignition Switch On gauges on Trim works. Move to Start Zero. Thinking Relay at engine
or Ignition Switch. Most likely what part and if possible part number. Any quick check with volt
meter to confirm. Regards Motor ran fine an hour later No Start.