No power going to ignition circuit breaker

Full Eclipse

Recruit
Thread starter
Joined
Apr 29, 2011
Messages
4
Help, I hope someone can answer my question, Mercury 3.0L 2002 -no power coming in to the ignition circuit breaker- checked and replaced 20 amp fuse back at he battery. Does the main circuit breaker {50 amp} need to be replaced. Unplugged and plugged in connections at harness near front panel, Im baffled.
:mad:
 

Splat

Lieutenant
Joined
Jul 20, 2008
Messages
1,366
Re: No power going to ignition circuit breaker

Gonna need to borrow or buy a cheap multimeter, start at the battery and start tracing your way back till you find the loss.

Harbor freight carries a cheap meator for only a few dollars. It's the only way to determine your problem.

Bill
 

fishrdan

Admiral
Joined
Jan 25, 2008
Messages
6,989
Re: No power going to ignition circuit breaker

Check the fuse (fusible link) bolted onto the starter's main + lug, it's about 1"x1" square. See if there is power on both sides of the fuse and that it's not blown.
 

Splat

Lieutenant
Joined
Jul 20, 2008
Messages
1,366
Re: No power going to ignition circuit breaker

Wait was the 20 amp fuse blown? Did it blow again after you replaced it?

Bill
 

Full Eclipse

Recruit
Thread starter
Joined
Apr 29, 2011
Messages
4
Re: No power going to ignition circuit breaker

Wait was the 20 amp fuse blown? Did it blow again after you replaced it?

Bill

New 20 amp fusable link, new glass 20 amp fuse back at battery- Just took off main and the terminals came out of the breaker when un srewing wires- gonna go get a new one- Is this part of the chain to the ignition?
Thanks for the multi meter advice
 

NYBo

Admiral
Joined
Oct 23, 2008
Messages
7,107
Re: No power going to ignition circuit breaker

Welcome to iboats!:cool:

New 20 amp fusable link, new glass 20 amp fuse back at battery- Just took off main and the terminals came out of the breaker when un srewing wires- gonna go get a new one- Is this part of the chain to the ignition?
You have found the problem! Replace the main breaker and you'll probably be golden.
 

Full Eclipse

Recruit
Thread starter
Joined
Apr 29, 2011
Messages
4
Re: No power going to ignition circuit breaker

Welcome to iboats!:cool:

You have found the problem! Replace the main breaker and you'll probably be golden.

I hope your right nybo- just got back from west marine-had to order the right one{ round, that fits into the mounting bracket} Get it in 5-7 days -Thanks for the Welcome, Ive always lurked around this site, thought I might as well join up !:)
 
Top