Nissan NS40C Disassembly - Hidden Bolt

[Feathercraf1]

I'm attempting to pull the power head off a Nissan NS40C
Does anyone have an idea how to remove the "hidden bolt" ?

Nissan Engine base bolt 910203-0640
Power Head to Drive shaft housing

 

[pvanv]

Which bolt?

 

[Feathercraf1]

Appears to be Number 14.
The power head cylinder head is right on top of it

 

[pvanv]

That attaches the engine base. After you have the power head off, you can pull that if needed.

 

[Sea Rider]

Asume that have disconnected the kill cord cables, disconnected the choke system prior removing the powerhead from its base. ? Have to wiggle the powerhead back and forth to lossen it from the base, probably still bit stuck ?

Happy Boating

 

[Feathercraf1]

Yes, all cables disconnected. Powerhead base shell is still fast connected to power head. Like I forgot two of the bolts. I didn't leave any bolts in. It's all still together. I didn't use a pry bar after I saw bolt 14. What exactly is press fit here? Is it a sealant on the parting surface?

 

[Sea Rider]

How many bolts have you removed so far from the lower motor pan ? that motor should have 6 lower bolts retaining the motor on top pan right ? Have you disconnected the throttle shaft rod that connects to the link rod that connects to the advancer arm ?

Happy Boating