New rigging wire question

[5150abf]

I got all the stuff to rig my new engine, F50, but at am a loss on the wiring.
I bought it through work, a boat company, our engine guy, certified Yamaha installer, is going to hang the engine but I want to have as much done as possible for him

Off the tach, ProII, I have black and blue wire out of the same grommet, yellow black and green out of the same grommet then a pink/red out of a plug.

From the key switch there are a red, yellow black and green.

I have the tach/oil sender harness but that is just a plug off the back of the tach

What goes with what?

 

[Scott Danforth]

colors are standard

however if yamaha follows them, I cant be certain.

what does the rigging manual tell you ?
[h=2]American Boat and Yacht Council Standards[/h]

Black	Ground	Negative / Neutral Main Return
Blue-Stripe	Tilt up and or trim out	Tilt and or trim circuits
Brown	Alternator Charge Light	Generator Terminal or Alternator Auxiliary Terminal to Regulator
Generator Armature	Generator Armature to Regulator
Pumps	Circuit Breaker or Switch to Pumps
Brown w/Yellow	Bilge Blowers	Circuit Breaker or Switch to Blower
Dark Blue	Cabin & Instrument	Circuit Breaker or Switch to Lights
Green or Green w/Yellow Stripe	Bonding System	Grounding Wires (if insulated)
Green Stripe	Tilt down and/or trim in	Tilt and or trim circuits
Grey	Navigation Lights	Circuit Breaker or Switch to Lights
Tachometer	Tachometer Sender to Gauge
Lt. Blue	Oil Pressure	Oil Pressure Sender to Gauge
Orange	Accessory Feed	Ammeter to Alternator or Generator
Common Feed	Distribution Panel to Accessory Switch
Feed	Accessory Circuit Breakers or Switches
Pink	Fuel Gauge	Fuel Gauge Sender to Gauge
Purple	Ignition	Ignition Switch to Coil & Electrical Instrument
Instrument Feed	Distribution Panel Electrical Instruments
Red	Instrument Feed	Distribution Panel to Electrical Instruments
Power Feeds	Positive Main Power (particularly un-fused)
Tan	Water temperature	Water temperature sender to gauge
Yellow	Generator Field	Generator to Regulator Field Terminal
Ground	Negative / Neutral Main Return
Yellow w/Red	Starting Circuit	Starting Switch to Solenoid

COLOR ITEM USE

 

[boscoe99]

 

[5150abf]

Motor just dropped today and I just got home so haven't looked at the manual yet.

There are couple guy sat work that do that all day, so if I can't get it no biggie, just wanted it as far along as possible for them.

Of coarse I pull the box off and there is a giant hole in the cowl and a scratch down the side from shipping damage.

It will be made right but still.

I am jazzed, back on the water Saturday!

Thanks guys, gonna go try to sort this.