Re: New prop, wobbles, center off a bit
Boat ran great with the new prop. Little higher on the rpm's even though its the same "size x pitch" as the old one. Old is a michigan match, new is a mercury made prop.
I looked for a 11.25 x 11p prop and cant seem to find one. Im guessing i have to move on the size before choosing pitch to lower the rpm by 100.
Anyways, with a load and 2 people, im getting 5,800rpm at 14mph (guage, not gps) in calm waters. It used to get about 100rpm less. My max rpm should be 5,750 according to the sticker on the motor.
Now heres where it gets funky. With the old prop, i used to drag like heck with wot and trimmed all down. In order to get to speed and bring the rpm's up, i would have to trim up.
Yesterday with the new prop, i would hit 14mph and wot at 5,800 with trim all the way down. If i trimmed to get the bow up, id get an increase in rpm. So basicly, i only trimmed a little bit to get the bow up slightly, instead of trimming up higher (like with the old prop) to get some more speed out of her.
This is with an almost exact load as the previous prop would run under.
Any suggestions, questions?