neutral start safety switch

[ke_kahuna]

Aloha!
I have an 86 4.3 cobra I am finishing installing, I have a manual but can't seem to find where
the 2 wires go to coming out of the remote control,I believe its the saftey so the motor won't
start in gear,right now it does start in gear so I need to connect that 2 wires but where?
any suggestions?
mahalo!!!!

 

[Don S]

Re: neutral start safety switch

If the wires on the control are Yellow/w red stripe, then it is the neutral safety switch. it would hook inline in the yellow/w red stripe wire coming from the ignition switch going to the engine.

If the wires on the control are not that color, it could be a kill switch.

 

[ke_kahuna]

Re: neutral start safety switch

Thanks don! It is yellow with red,but do both wires go to the same ign pole?
I assume the one that goes to the starter solenoid,correct?

 

[ke_kahuna]

Re: neutral start safety switch

Thanks for the help! After I thought about it I realized that the 2 wires on the remote control go one end to the ignition and the other connect to the wire going to
the starter solenoid after all its a switch if its open no current to starter
im getting better everyday! LOL