Need help in finding a really cheap, small engine carb tool, Pac Man #308535003

[Big Bubba]

Hello everyone,
I need help in locating a really cheap small engine carb adjusting tool to adjust the carb low and high speed adjustment screws on a Ryobi model S430 weedeater. The screws on it have the pac man type and I do not own this tool. Does anybody know where I can purchase this tool at a extremely cheap price? I see they range from $20 to $40 but was hoping top get it cheaper than that.

 

[MTboatguy]

Re: Need help in finding a really cheap, small engine carb tool, Pac Man #308535003

Bubba,

Did you try to look on ebay? That is probably going to be your best bet.

 

[Grub54891]

Re: Need help in finding a really cheap, small engine carb tool, Pac Man #308535003

I knowwhat your steppin in,I tookmine out,used a dremmel with them skinny cutting wheels,made a slot in it,it worked.had to use a surgacal plires to get em out as ny needle nose were to big.

 

[Cofe]

Re: Need help in finding a really cheap, small engine carb tool, Pac Man #308535003

You can use an electric wire splice by carefully smashing it to fit with needle nose pliers. I ended up buying the proper tool on ebay awhile back.

 

[Big Bubba]

Re: Need help in finding a really cheap, small engine carb tool, Pac Man #308535003

Thanks to everyone. I forgot about checking with my local small engine supplier here in town and he had it for $15.00 plus a little tax added to it was well under $20.00 so he was cheaper than on-line. Thanks again.