Mixing color with White Marine Tex

[Link]

Anyone ever tried it?<br />A friend has a spendy little router table and the plate the router is attached to is shiney black.<br /><br />Was wondering if spraying in a little Phantom Black while mixing or maybe a dye?<br /><br />Thanks<br />Link

 

[Chief101]

Re: Mixing color with White Marine Tex

You can get dyes fro Brownell's for gunstock use to add to your epoxies. http://www.brownells.com/aspx/ns/store/ProductDetail.aspx?p=1038&title=ACRAGLAS+GEL~ <br />Look to the bottom of the page to find the dye kits. Chief Chief

 

[Link]

Re: Mixing color with White Marine Tex

Thanks Chief<br />Thought I might also look into ritz dye also.<br />It comes in liquid and powder for cold use.<br /><br />Link

 

[Chief101]

Re: Mixing color with White Marine Tex

I actually tried the ritz in liquid form years ago with poor results, not compatible. The powder might be a good choice tho. The Brownell's black dye is less than 5 bucks and last time I ordered some it came in less than a week. Chief Chief

 

[KRS]

Re: Mixing color with White Marine Tex

I just mix small batches of epoxy (West Marine), color it with commercially available paste colorants, then thicken it and use like marine-tex, albeit not quite as thick as marine-tex.