charliedaubitz
Seaman Apprentice
- Joined
- Sep 1, 2008
- Messages
- 34
Is this the only seal that usually goes out, besides the gaskets on the fill and drain plugs. My problem is, This 1969 motor has sat for who knows how long, it is still full of lower unit oil and there is no sign of seal leakage. I pulled off the prop and there is even cosmoline still on the shaft. I sure looks like all I would have to do to change the seal is pull off that bearing retainer and press out the seal and install a new one. Or, should I run it and watch it for leakage.