LCR 400 ID Wiring help

[riverposie]

I have a Hummingbird LCR 400 ID depth finder. I cut the 2 plug connectors off that connected to the back of the depth finder & also the connector from the back of the unit..So now it have 4 wires & have no idea what connects to what ..I am trying to replace the corroded connectors with new but I now have 4 wires & dont know what each one does or how to connect them corretly.

 

[riverposie]

Re: LCR 400 ID Wiring help

i have a hummingbird lcr 400 id depth finder. I cut the 2 plug connectors off that connected to the back of the depth finder & also the connector from the back of the unit..so now it have 4 wires & have no idea what connects to what ..i am trying to replace the corroded connectors with new but i now have 4 wires & dont know what each one does or how to connect them corretly.

where is all the help here..nobody has acknowledged in days

 

[Silvertip]

Re: LCR 400 ID Wiring help

You butcher an electronic device and expect someone to understand exactly what you did?
How about matching wire colors. How about contacting Humminbird.

 

[UncleWillie]

Re: LCR 400 ID Wiring help

Why would you Cut the wires instead of just unplugging them?

Your only hope for that Old Legacy Unit is to carefully strip the jacket off the cables and match up the wire colors.
Be sure to repair the shield if it has one.
The cables were never designed to be repaired. Good Luck!

 

[riverposie]

Re: LCR 400 ID Wiring help

You butcher an electronic device and expect someone to understand exactly what you did?
How about matching wire colors. How about contacting Humminbird.

no, i didnt butcher..the terminals were corroded off & s somebody should have a wiring diagram, ,but never mind..my friend said he can hook it up in minutes..piece of cake...so be it...