Need recommendation for good Ignition Switch for 99 Merc 150 XR6 with push in choke
K Knottymate Seaman Joined Jan 25, 2011 Messages 50 Aug 23, 2017 #1 Need recommendation for good Ignition Switch for 99 Merc 150 XR6 with push in choke
Dukedog Captain Joined Oct 6, 2009 Messages 3,431 Aug 25, 2017 #2 most are pretty generic from way back when.. prefer oem... jus wanna solder and heat shrink all connections... you'll be way ahead down tha road... jmo.
most are pretty generic from way back when.. prefer oem... jus wanna solder and heat shrink all connections... you'll be way ahead down tha road... jmo.
K Knottymate Seaman Joined Jan 25, 2011 Messages 50 Aug 26, 2017 #3 A Sierra MP 5200 was suggested. Is there an OEM part number available or is the Sierra OK?
Dukedog Captain Joined Oct 6, 2009 Messages 3,431 Aug 26, 2017 #4 after market will probably be of if ya solder and heat shrink also... one oem number, 87-88107A5, sure there are more....
after market will probably be of if ya solder and heat shrink also... one oem number, 87-88107A5, sure there are more....
K Knottymate Seaman Joined Jan 25, 2011 Messages 50 Aug 26, 2017 #5 Thanks for the response. Believe found a switch with no lead out wires to solder. My switch has 6 direct terminal screw in receptors The Teleflex Ignition switch by Sierra part number MP56472 had those screw in terminals.
Thanks for the response. Believe found a switch with no lead out wires to solder. My switch has 6 direct terminal screw in receptors The Teleflex Ignition switch by Sierra part number MP56472 had those screw in terminals.
