I need a part # for a 46' 1.1 coil

[puma4440]

Hello all,

I need a new coil for my 46' ranger, and all part # searches seem to end at 68'. If sombody would happen to have a part number for a coil for a 46' Evinrude Ranger model 4407, or knows if later models like a colt,ect., will work, I would greatly appreciate it.

Thanks,
puma4440

 

[Daviet]

Re: I need a part # for a 46' 1.1 coil

Marineengine.com only goes back to 1955, I think I have a parts manual for that engine, I will check tomorrow and post back.

 

[DJ]

Re: I need a part # for a 46' 1.1 coil

Try.

www.tcoutboard.com

 

[1946Zephyr]

Re: I need a part # for a 46' 1.1 coil

Also try Engine Blade and Prop, or Sea-Way Marine. If all else fails, then go to the AOMCI website and post a want ad.

 

[puma4440]

Re: I need a part # for a 46' 1.1 coil

Wow, that was fast,lol. I've put in part requests at above mentioned places, thank you all very much. Daviet, I would appreciate that very much.

 

[1946Zephyr]

Re: I need a part # for a 46' 1.1 coil

Yea, I just rebuilt a 1941 Johnson HD-20 and Sea-Way was able to provide me with a brand new crank, rods, pistons and rings for my motor, plus two new comdensors, so I think they'll help you out. Engine Blade and Prop helped me out on an old Evinrude in the past too. I think it would be a good idea to join up with the AOMCI, too. It's a great organization and there should be someone around that may have what you need in the future.

 

[Daviet]

Re: I need a part # for a 46' 1.1 coil

Well, I found the part number (375189), and beleave it or not it is still an active part number. It is listed as a vintage part, that means that they are a special order, but you will not like the price.$112.49, on the site I looked at. You would probably be better off checking with some of the above listed places and see if they could help you out.