Hynautic Steering Helm Seal Kit

[Blake0912]

I had posted on here last week about my Hynautic Steering system. Here is an Update I added Fluid(Turns out it was not that low about 1/2 full) Then I pressurized it to about 35-40PSI and started to turn the wheel , the steering was very responsive. But then fluid started leaking out from under my steering wheel. So I pulled it all apart (down to the ball bearings) the seals in it are hard and I assume that is the problem, the unit and bearings look to be in great shape.
So now the question is where is a good place to order the helm seal kit and I also need the three small O rings to seal the lines going into the wheel, I lost them while pulling the lines out. Also does anyone know the model of system I have so I can order to correct kit?

Few pics included

 

[smokeonthewater]

Re: Hynautic Steering Helm Seal Kit

Seal Kits For Hynautic Steering System - iboats

 

[smokeonthewater]

Re: Hynautic Steering Helm Seal Kit

Hynautic Steering Identification

 

[Blake0912]

Re: Hynautic Steering Helm Seal Kit

Thank You, Looks like I have the H-50 Helm.

 

[smokeonthewater]

Re: Hynautic Steering Helm Seal Kit

///most welcome..... I see I just got a promotion to rear admiral. respect my athoritah!!!!!!!!

 

[Blake0912]

Re: Hynautic Steering Helm Seal Kit

any idea where I can find the seals for the three hoses that connect to the helm, mine flew off and are lost in the bilge somewhere

 

[smokeonthewater]

Re: Hynautic Steering Helm Seal Kit

I don't recall any loose seals on mine.... if just orings I'd hit up my local napa or parker store

 

[Blake0912]

Re: Hynautic Steering Helm Seal Kit

Yes there just small O rings I'll try to find one in the boat so I can compare at the store. I hope this seal kit works im tired of messing with this steering and now my tilt and trim Is acting up. On a positive note at least it's off season