How to connect Pink cable from Oil Sensor in Yamaha 40hp Autolube

Armatas Elias

Recruit
Joined
Oct 18, 2020
Messages
1
Hello, The wires on my outboard were destroyed by mice. I asked an electrical technician , who connected them, but then after he left, i saw a Pink cable coming out of the Oil sensor that was cut, hanging , not connected.
The engine starts , but only goes on slow speed, does not develop speed. Could it be on safe mode due to the cable not connected? The led light on the front is OFF. The 2 wires from the led, go now to the engine ( CDI ), not to the oil sensor. I dont know if the electrician did correct connections.
Any idea where i should connect this pink cable? The Black cable that comes out of the oil sensor , i put it in Ground.

thanks
 

Attachments

  • IMG_20200925_150857 (1).jpg
    IMG_20200925_150857 (1).jpg
    704.5 KB · Views: 4
  • IMG_20200925_150745.jpg
    IMG_20200925_150745.jpg
    503.5 KB · Views: 4
  • IMG_20200925_150818.jpg
    IMG_20200925_150818.jpg
    934.4 KB · Views: 4
  • IMG_20200925_150826.jpg
    IMG_20200925_150826.jpg
    883.2 KB · Views: 4
Top