How do I access trim limit switch on 1973 Merc 165?

[ParallaxBill]

I made the tough discovery that it looks like it's mounted outside the transom but above the universal joint area. How the heck do I get to it to replace it if necessary? I sure hope the stern drive doesn't need to be pulled to replace the switch.:%

But can I not check it's function from the two leads, one blue, one purple from inside the boat?

Please help.:'(

 

[Bondo]

Re: How do I access trim limit switch on 1973 Merc 165?

Ayuh,...... The Outdrive,+ Probably the Gimbel Housing as well..........

You can check the wires on the Inside,... But,.. They Usually Rot Off, Outside.......
And,.... Most of them are Black Wires......

 

[Laddies]

Re: How do I access trim limit switch on 1973 Merc 165?

It will take removing the drive, bell housing and gimbal ring to change the switch and with a little luck it will last a couple of years at best. Most have been bypasted as it is a very major job and the switches are short lived

 

[ParallaxBill]

Re: How do I access trim limit switch on 1973 Merc 165?

So is my best option to trim up using my up/out and up button like I have been doing? I guess I can watch my trim gauge to make sure I keep it in the green.

That's not what I wanted to hear but it is pretty much what I expected. Nice move putting them in accessible areas after 1975(?).

Thanks for the help.

 

[Bondo]

Re: How do I access trim limit switch on 1973 Merc 165?

If you find the wires on the Inside of the Transom,+ By-pass them at the bullet connectors,.......
You'll be able to use the Up button,.... Instead of that,+ the Tilt button......

 

[ParallaxBill]

Re: How do I access trim limit switch on 1973 Merc 165?

Thanks much.

 

[ParallaxBill]

Re: How do I access trim limit switch on 1973 Merc 165?

By-passed the switch today by joining the purple and blue wires. Up/out functions as the up trim and trailer up. Down still works the down. No more having to hold two buttons in to trim up while driving.:%

All is well.