GameOnSalmon
Seaman Apprentice
- Joined
- May 16, 2012
- Messages
- 46
Hey Guys,
I have an opportunity to get a great Deal on a 1989 Johnson 175. It's a 25" shaft and
it needs to be a 20". I have access to parts the housing and a short shaft gear box.
My question is, How long Could i expect to do a job like this, I know my way around
the evinrude/johnsons, but just enough to get in trouble.
I have no idea if this is a 2 hour Job...or a 20 hour Job...
If anyone could shed a little light for me I would appreciate it. If its a reasonable
job... I am going to go pick up the motor 2morrow.
Thanks In Advance for any and all Input.
Regards,
Robert
I have an opportunity to get a great Deal on a 1989 Johnson 175. It's a 25" shaft and
it needs to be a 20". I have access to parts the housing and a short shaft gear box.
My question is, How long Could i expect to do a job like this, I know my way around
the evinrude/johnsons, but just enough to get in trouble.
I have no idea if this is a 2 hour Job...or a 20 hour Job...
If anyone could shed a little light for me I would appreciate it. If its a reasonable
job... I am going to go pick up the motor 2morrow.
Thanks In Advance for any and all Input.
Regards,
Robert