Hello everyone, I'm a newbie to this forum AND REALLY NEED Y'ALLS HELP!!!!!!!!

[Masters]

Do to health issues I had to give up fishing for a while, anyway I'm going back at it. I found a great deal on a 1995 Stratos 201pro xl with a 200 Johnson & tandem trailer. It had been stored inside for several years and looks brand new, my problem is some mice or rats made a terrible mess of the wiring. I will happily pay for a wiring diagram or where to find one. I have a manual for the motor on the way, so I got that, what I need is one for the boat.
Thanks,
Alan

 

[dwco5051]

Here is a start. This chart is from Stratos. Complete wiring diagrams for most boats are hard to find. I am not sure about Stratos but you might try to contact the company. I have a 1990 20' Nitro that the previous owner did a lot of rewiring on in a haphazard fashion. I haven't got every thing working as it should yet but anytime something quits working right I fix it. Can't imagine doing a complete rewiring.

 

[jbcurt00]

Boat re-wire is going to be DIY. Not available, likely never was.

Google boat wiring diagram and find one that has similar stuff to what your boat has

 

[JoLin]

This will help, too- ABYC wiring color codes. When you can't trace it, the color can often tell you where it goes.

http://www.boatingmag.com/abyc-color-codes-boat-wiring

 

[Masters]

Thanks for your reply & help,
Alan M.

 

[Grub54891]

Be sure to use marine grade wiring, and good shrink wrap type connecters. A 20 footer should be not to bad to re-wire, but just getting at the wiring could be a challenge.

 

[Clever screen name]

At least with smaller boats its almost always easier to rewire then to figure out the last guys wiring ideas.