Good source for prop repair

[CRT Skiff Crafter]

Hello all.<br /><br />I have a prop I'd like to get rebuilt this winter and would like some advice on a source. <br /><br />I did do a forum search on this, but didn't turn up anything.<br /><br />As always, input appreciated.<br /><br />Regards, crt.

 

[JasonB]

Re: Good source for prop repair

Not sure if there are any board sponsors doing prop rebuilds, but I send mine to Midwest Propeller, http://www.midwestpropeller.com/ . I've always been happy with their service and I usually have my prop back within a week or so. There are sometimes discounts on their website that save 10% or so.

 

[CRT Skiff Crafter]

Re: Good source for prop repair

Thanks JasonB.<br /><br />I'll check it out!<br /><br />Regards, crt.

 

[andrewgroup]

Re: Good source for prop repair

Here in Indianapolis is the Makers of the Turbo Brand props. They also run a full service prop shop. http://www.precisionpropeller.com <br /><br />I'm usually charge 75.00 for repair, balance, cup on my aluminum prop. (Free paint)<br /><br />The 2 guys working in this department have about 100 certificates of certification plus the latest equipment to do it right. I'm always pleased and it never takes more than 3 days.

 

[kdmiller8251]

Re: Good source for prop repair

I have used Midwest also..<br />No complaints, check their website for a coupon also...<br /><br />Tallman

 

[CRT Skiff Crafter]

Re: Good source for prop repair

Thanks guys!<br /><br />Regards, crt.