Gimball bearing

[Dave-R]

Hello all: I am replacing the motor in my boat, and I want to do the bellows and gimball bearing. I have the motor out now. I have the alignment tool and the bearing driver tool. I don't have a slide hammer. Can I tap it out from inside the boat. And if not, I think I can get a slide hammer from the NAPA store,but I don't know if it can go small enough to pull the bearing.
The drive is a Volvo sx. Thanks Dave

 

[Bondo]

Re: Gimball bearing

I have the motor out now. Can I tap it out from inside the boat.

Ayuh,... Sure, why Not....

 

[jtybt]

Re: Gimball bearing



Sometimes that's the only way to get it out.