gas/oil mixture Force 50hp 1988

[tyank516]

I just purchased a used pontoon with a Force 50hp 1988. I am not sure what mixture i should use. Help?

 

[rbruce63]

Re: gas/oil mixture Force 50hp 1988

1 pint of Mercury Premium TCW3 or QuickSilver Premium TCW3 to 6 gallons of regular unleaded fuel.

 

[tyank516]

Re: gas/oil mixture Force 50hp 1988

thanks rbruce63. I'm a new boater. Could you tell?<br />I appreciate the information.

 

[dtherrien]

Re: gas/oil mixture Force 50hp 1988

Yeah...that is a 50:1 ratio...it doent work out exact...but 1 gallon of oil to 50 gallons of gas, 1/2 gallon of oil to 25 gallons of gas or 1 quart to 12 gallons of gas. also you can use any marine 2 stroke oil with TCW3.I like penziol my self lower cost than the dealer stuff!!!

 

[DHANSEN]

Re: gas/oil mixture Force 50hp 1988

Can Anyone Tell Me What The Oil Mixture Is For A 1993 40 Hp Force Outboard? Also I'm Wondering If This Is A 2 Stroke Motor

 

[gregmsr]

Re: gas/oil mixture Force 50hp 1988

rbruce,
To make mixing 50:1 easier, go to Wally-World and buy you a 2-stroke mix measure bottle. It has all the ratio's printed on the bottle, ounces of oil to gallons of gas.

Be sure you have the correct amount of oil per gallon. Running too lean on oil will cause engine failure. Pay attention while doing this. I add a little more oil than calls for (helps protect older motors).

 

[gregmsr]

Re: gas/oil mixture Force 50hp 1988

Sorry, last reply to tyank.