Fuel Rail assembly 5.0 MPI OW376228

[Nede2]

I was wondering if someone could help me get the fuel rails back in place. I had them out of place to get the injectors cleaned. I ended up with 2 extra nuts which isn’t right. One back of injectors is sitting deeper into the intake than the other. I tried piecing it together using the IPB but that wasn’t much help. It’s be great if someone had time to snap a picture of each side to show how the screws and bolts are put in. Thanks

 

[Nede2]

Item #20 is in 4 places but 2 on the opposite I think had a nut with them as well.

 

[tpenfield]

Greetings and welcome to iBoats. . .

Perhaps you can post some actual photos of the engine/intake area to help folks visualize better the issue.

 

[Scott Danforth]

usually a bit of WD-40 is all that is needed on the o-rings to get a fuel rail to seat.

 

[QBhoy]

Hi

I’ll be winterising mine in the next few days. I’ll try and take some pics.

 

[Nede2]

Greetings and welcome to iBoats. . .

Perhaps you can post some actual photos of the engine/intake area to help folks visualize better the issue.

I’ll get some pictures of exactly what I’m talking about. Pardon the new guy gaffs while I learn my way around both the boat and the forum.

 

[Nede2]