Am looking to rebuild my 1989 150's fuel pump. Was looking at it last night. <br /><br />Am I correct in thinking:<br /><br />1:cut ty-wraps and remove hoses<br />2:remove two bolts, lower starboard, and upper port..this will release it from the motor?<br />3:remove other 2 bolts remaining, this will lead to where the diaphrams are?<br />4:remove diaphrams...do these pop out?<br />5:replace diaphrams and reverse process..<br /><br />I'm thinking that this is pretty easy, but correct me if I am wrong!!