I went to pull the fuel injectors so I could send them off to be cleaned. Since this is a 2005 boat, this is probably the first time they've been pulled and they gave me a little bit of a fight. Some of the injectors popped off the rail rather than out of the manifold so I hope I didn't do any damage. My guess is that the injector clip just gave way.
Also, I noticed some of the injectors I pulled didn't come out with the o-ring. They were still in the manifold but I was able to get them out. In the picture below, I noticed the injectors that didn't come out with the o-ring did not have that little plastic piece at the tip of the nozzle. I did not notice this until after I closed up the boat so I didn't look yet to see if they just might be sitting in the port. I'm a little concerned now if they may have fallen into the manifold.
Also, I noticed some of the injectors I pulled didn't come out with the o-ring. They were still in the manifold but I was able to get them out. In the picture below, I noticed the injectors that didn't come out with the o-ring did not have that little plastic piece at the tip of the nozzle. I did not notice this until after I closed up the boat so I didn't look yet to see if they just might be sitting in the port. I'm a little concerned now if they may have fallen into the manifold.
