flywheel torque specs for '64 big twin

Dezangler

Recruit
Thread starter
Joined
Jul 15, 2003
Messages
4
I have 1964 evinrude big twin 40 horse. Had problems getting it running but have solved that problem thanks to help given by some of you guys. Any way, does anyone know what the correct torque specs are for the flywheel. I have sheared two woodruff keys in the same day due to improper torque. (very embarrasing getting towed in by the same fisherman twice in one day!)Also can I use a standard woodruff key from the hardware store or does evinrude recommend a special hardened one available through a dealership. thanks.
 

Paul Moir

Admiral
Joined
Nov 5, 2002
Messages
6,847
Re: flywheel torque specs for '64 big twin

That key is not supposed to do anything after the flywheel is torqued, so you should be able to use any key. The key is only there to aid in assembly. Clean your mating surfaces _extremely_ well, even use acetone to be sure. Then torque the flywheel nut to 100-105 ft/lbs. To do this you'll need some way of holding the flywheel. Usually, this is done with a large strap wrench, but jamming the electric starter teeth may also work. Any less torque, and the key will shear again.<br />Good luck!
 

Lark40

Senior Chief Petty Officer
Joined
Oct 29, 2001
Messages
793
Re: flywheel torque specs for '64 big twin

There are flywheel holder tools available that key into the teeth and give an excellent grip.<br /><br />These are usually sold by SnapOn and other tool suppliers. See them on eBay also.
 

Dezangler

Recruit
Thread starter
Joined
Jul 15, 2003
Messages
4
Re: flywheel torque specs for '64 big twin

thanks guys. Got it all back together. Running great.
 
Top