i either have a blown head gasket or a cracked block/head, either way oil and water mixed and made a nasty mud and i was wondering if anyone makes a kit i can use to flush all the muck out of my engine. thanks in advance!
i need to figure out what happened but i want to get all the gunk out before i start working on it, so i was wondering if there was a kit that i can use to flush all the nasty gunk out before i start getting hands on. right now it would be like rebuilding a engine in a mud pit.
to answer your other question its a 1989 cobalt condurre 202 open bow. the boat has 800 hours on it and is i great shape. this was the first time i took it out and i only got to drive it for maybe 10 minutes before it started acting up. its a great boat and i really hope its nothing big and i am able to fix it.
thanks for the link! that will help out a lot! i was just seeing if there was anything out there that can be used to help me clean up all the oil/water mix that got into everything. i guess im just going to have to start with a compression test and if needed start tearing everything down and cleaning as i go. thanks again for everything.
