fixing my homade bimini

[kawk]

Made a bimini a couple years back using 1/2 conduit. im trying to replace the hardware. such as jaw slides and eye ends. For the life of me I cannot find any 1/2 hardware on the interweb.Tthey use to make them and I have proof because the worn out ones are sitting on my desk. Anyone have a clue where I might find 1/2 inch jaw slides etc. thanks in advance

 

[steelpony5555]

Check this our http://www.perfectfit.com/15312/154...gs/Long-Slide-Bracket--E--Z-Mount-System.html If this is what you need I understand your pain...took me a week to find this ...I guess Bayliner had them on their boats....

 

[Yegboats]

Not familiar with 1/2" external, or internal eye ends. only the common 3/4" or 7/8" If Steel linked what you're looking for here is a link that shows measurements.
http://www.sea-dog.com/groups/1655-jaw-slide-bracket-fittings

 

[Scott Danforth]

1/2" EMT is 0.706" OD (0.622 ID)
1/2" IMC is 0.815" OD (0.675" ID)

I would remake it using -12 stainless hydraulic tubing myself (0.75" OD)