evinrude information

nuklhed66

Cadet
Joined
Sep 26, 2001
Messages
13
hello.i sure hope someone can help me. i just purchased my first boat. it is a 20' wellkraft with a evinrude engine.the engine cover has been painted but still has the v6 emblem as well as the vro emblem.i have a serial no. e200stlcua . can anyone give me any imformation on this engine? rpms, horsepower,fuel mix,and a good spark plug to use,and anything i should look out for etc.. i am new to the world of boating and any advice ir help would be greatly apreciated..thanks nuklhed.
 

fone_man

Senior Chief Petty Officer
Joined
Jul 8, 2001
Messages
701
Re: evinrude information

e200stlcua <br />-------------<br /><br />E = Evinrude<br /><br />200 = 200 HP<br /><br />ST = Special Styling - Trim & Tilt<br /><br />L = Shaft Length 20 in<br /><br />CU = 1987 <br /><br />A = Model Run or Suffix<br /><br /> :cool:
 

Dhadley

Supreme Mariner
Joined
Feb 4, 2001
Messages
16,978
Re: evinrude information

A very strong motor. 200 XP 1987. Rev limiter is at 6200. Use 87 octane FRESH fuel and GOOD oil at 50:1 ratio. Champion QL77JC4 or L77JC4 plugs. Mine was a great motor. Wellcrafts are good boats too. What model?<br /><br />Good luck!
 

nuklhed66

Cadet
Joined
Sep 26, 2001
Messages
13
Re: evinrude information

just wanted to say thanks for the imformation on the evinrude. i apreciate your time.nuklhed :D
 
Top