solar7647
Lieutenant Junior Grade
- Joined
- Apr 23, 2009
- Messages
- 1,218
Has anyone ever seen a twisted drive shaft but the coupler didn't fail? Alpha 1 gen 1.Was cruising yesterday about 3200rpm and suddenly the boat came to stop and the engine died like right now. 4.3l 205, would not crank at all after, I would get maybe a 1/8th turn and it would stop like the engine locked up. After a little time I was able to get the engine to crank and start and putted back to the ramp. It seemed to run fine. I inspected the drive thinking I hit something and found no damage not even a scratch on the prop. Once home I put it on muffs and it started right up, when out of the boat I could hear there was definitely an issue in the drive. I pulled the drive and found the splines on the shaft twisted and pulled the cap and found the gears chewed to **** and pieces of metal all over and no gear oil. Best guess is I have been loosening lube over time and finally was dry and metal got into the gears and it jammed up the works.