evenrude 25hp jumping out of gear

jimmcgee5

Recruit
Joined
Apr 14, 2001
Messages
4
I used my outboard at the weekend, at first it ran fine at top speed , but after an hour it started to jump, It will only go to half throttle then the outboard jumps , looks like it is trying to jump out of gear, hold the gear lever and it moves when it is jumping , any ideas!
 

Fouled Plug

Ensign
Joined
Jun 29, 2001
Messages
935
Re: evenrude 25hp jumping out of gear

How's the lower unit lube look? Did the prop strike anything? Hopefully it's just a shifter adjustment issue and not the clutch dog and gear. Kinda pricey!<br /><br />------------------<br />I'm going to invent a TCW3/citronella oil blend and make a fortune!
 

PaulP

Seaman Apprentice
Joined
Jun 16, 2001
Messages
35
Re: evenrude 25hp jumping out of gear

What year is the motor,sounds like a clutch dog and worn gears, check gear oil for metal<br />chips,if so, pull apart and check for worn gears, if so replace clutch dog and forw&rev<br />gears,clean out metal chips,good luck.
 

jimmcgee5

Recruit
Joined
Apr 14, 2001
Messages
4
Re: evenrude 25hp jumping out of gear

Forgot to say , I also have a spare 20 hp johnson outboard with a good bottom leg<br /> , would it be hard to change them over. Will have a look at the gear oil at the weekend , dont have a garage and it is raining here in Scotland at the moment.
 

hondon

Lieutenant Commander
Joined
Jun 11, 2001
Messages
1,922
Re: evenrude 25hp jumping out of gear

Since no one asked ,I will . Is this a shear pin or spline propshaft?
 

jimmcgee5

Recruit
Joined
Apr 14, 2001
Messages
4
Re: evenrude 25hp jumping out of gear

split the gearcase on sunday and clutch dog and gears all worn, changed out gears from spare engine, have been up at loch lomand all week and engine is now running great. Thanks to everyone for advice. <br />CHEERS
smile.gif
 
Top