Engine tune 1975 85hp Evinrude

kato520

Recruit
Joined
Nov 28, 2008
Messages
4
G'day all, i have a 1975 85hp evinrude that idles to low and stalls. I would be really grateful if some one could tell me the correct plug gap and idle setting. Other than that it runs o.k , although i find it a bit heavy on the fuel ( 25L an hour @ full noise ) as it's only pushing a 4.5 meter fibreglass 1/2 cab. Thank's in advance.
 

tashasdaddy

Honorary Moderator Emeritus
Joined
Nov 11, 2005
Messages
51,019
Re: Engine tune 1975 85hp Evinrude

85 1973 - 1980 CHANPION PLUG L77JC4 or QL77JC4 gapped at .030.

you might have a dirty low speed jet in the carbs.

25L equals 6.6 us gallons. the rule of thumb, for consumption on an 85 hp, is 8.5 gpg, so you are doing good, with 6.6 gph.
 

HighTrim

Supreme Mariner
Joined
Jun 21, 2007
Messages
10,486
Re: Engine tune 1975 85hp Evinrude

....also set the idle to 650 to 750 RPM under load in gear.
 

kato520

Recruit
Joined
Nov 28, 2008
Messages
4
Re: Engine tune 1975 85hp Evinrude

That's great!! In the time it took me to do some gardening for the Missus, get my fuel,bait and beer i have all the answers i needed! Now if you can just do something about the rain and wind...... Once again, Thank's, from a very happy (now) Tasmanian!!!
 
Top