R. D. Ambrose
Cadet
- Joined
- Mar 15, 2010
- Messages
- 10
Hello all:
This is my first time so don't laugh if I say something dumb. I have a 1969 Starcraft Starchief Cabin Cruiser with a 120 HP Mercruiser. I have had it for eight years. The boat had a huge water leak around the transum. It would sink in two hours if I let it. I pulled the outdrive and discovered the drive shaft bellows was cracked. I replaced all three bellows and the hose. I took it to the lake on Monday and it ran great. There was a small leak but I was pretty happy with it. It has the 4 cylinder Chevy runs all day at 31 MPH. Great old boat
As I was getting ready to leave for the lake today I had the outdrive tilted up and could see that the lower (exhaust) hose was disconnected.
Do I have to pull the outdrive again? What did I do wrong, I used the glue and thought I had the clamp tight.
Any suggestions.
Roy
This is my first time so don't laugh if I say something dumb. I have a 1969 Starcraft Starchief Cabin Cruiser with a 120 HP Mercruiser. I have had it for eight years. The boat had a huge water leak around the transum. It would sink in two hours if I let it. I pulled the outdrive and discovered the drive shaft bellows was cracked. I replaced all three bellows and the hose. I took it to the lake on Monday and it ran great. There was a small leak but I was pretty happy with it. It has the 4 cylinder Chevy runs all day at 31 MPH. Great old boat
As I was getting ready to leave for the lake today I had the outdrive tilted up and could see that the lower (exhaust) hose was disconnected.
Do I have to pull the outdrive again? What did I do wrong, I used the glue and thought I had the clamp tight.
Any suggestions.
Roy