I have a 50 hp Mercury with a bad coil. I do not have the exact year for the ignition. The engine had the power head replaced when my dad bought the boat/engine in 1985. The serial number on the mounting bracket shows 5336558 which is 1979 but the ignition is an ignition driver set up and the actual ignition parts on the engine are from earlier 1970s models. The existing coil is a large red coil that fits in a mounting bracket that connects to the switch box. Coil is 332-2983. A new coil is NLA and only available used on ebay.
Has anyone run into replacing the coil on this type of ignition? If so is it possible to go to another type of coil that is still be manufactured? It looks like the CDI part 184-0001 will also attach to the switch box rather than one coil each to the spark plug as in the later models.
Any help would be appreciated.
Has anyone run into replacing the coil on this type of ignition? If so is it possible to go to another type of coil that is still be manufactured? It looks like the CDI part 184-0001 will also attach to the switch box rather than one coil each to the spark plug as in the later models.
Any help would be appreciated.