E Z Loader Trailer Spindel

[Red 52]

Grease go's in bearing buddy and comes out hole on other (inside) end of spindel. Is that grease going through both outside and inside bearing and then through a bleeder hole between the inside bearing and the seal ? This is a 1 1/16" and 1 3/8" bearing spindel W/surge brakes.

 

[Bob_VT]

Re: E Z Loader Trailer Spindel

Bearing buddies maintain pressure on the grease and yes it does come out when "overgreased". <br /><br />Bob

 

[jimmbo]

Re: E Z Loader Trailer Spindel

What Tyeeyaha is talking about is not a Bearing Buddy. It is called Sure Lube. It didn't the spring loaded ends just end caps with a grease fitting. You pumped these full of grease and after the hub was filled the grease would exit out a small hole in the spindle.