Does my engine need to be running?

[massimofinance]

First off, I want to thank all of you for always answering my questions right away; this is a great resource for a newbie like me!<br /><br />Second, I rebuilt my power head (1982 Evinrude 115HP VRO) put it back on top of the motor, connected all the wires, and when I put in the key and try the tilt, I hear the motor for the tilt whirling, but the motor does not tilt. Also, when I try to steer the motor, it does not move. Does the motor need to be running when I try either of these? I do notice some red oil dripping from the pistons that push the motor up. Is that bad?<br /><br />Thanks!<br /><br />MAX

 

[JB]

Re: Does my engine need to be running?

You should be able to operate the tilt and the steering with the engine turned off, Max.<br /><br />Hydraulic fluid leaking is a very bad sign.<br /><br />Did they both operate well before you pulled the powerhead off?<br /><br />This sounds like an engine trouble, but I will leave it here until we learn more.<br /><br />Good luck.

 

[massimofinance]

Re: Does my engine need to be running?

Hi JB, yes, they both worked fine before I pulled the top end off. When you say engine trouble, what do you mean exactly? <br /><br />Thanks!<br /><br />MAX

 

[marinemech1]

Re: Does my engine need to be running?

sounds like the steering has seized over winter you can try to free it up with some lube but best to replace cable/system if cable is "frozen"<br />also it sounds like your trim pistons are leaking and motor would tilt due to lack of oil get a service manual or a mechanic

 

[JB]

Re: Does my engine need to be running?

"Engine Trouble and Repair" is a category of fora we have to ask advice about problems, Max.<br /><br />It does appear that you have problems, so I will move this to Johnson and Evinrude Troubles and Repair.<br /><br />Good luck.