OK Here goes,I own a 1995 Nitro 170DC with a Mercury Tracker Pro Series 115 also 95 model.Not sure what happened but engine was ran without oil until it shut it self down.Oil was added and engine started ran fine.Next trip out a loose sound in engine started at speed of around 55mph when i backed off gas sound stoped did not attempt to raise speed after that.No alarm at anytime sounded.Next trip full of oil went out ran find but again at around same speed engine started makeing same loud loose or slinging sound.Before i could get my foot off pedal engine died .Flywheel want turn locked up.Was told engine may have ran hot.Water was coming from the small hole on left at normal stream not sure about T-tail.What damage may have occured on any of these two situations.